E-Liquid Cigarettes


Buy Geekvape Aegis Boost Pro 100W Pod Mod KitIt is important to carefully consider your decision when buying Geekvape Aegis Pro 100W Mod Kit. These are the important things to consider. This will help you decide if this is the right device.


Geekvape’s Aegis Boost range was a simple all-weather pod system until recently. The brand has improved its devices and added new features to make them more versatile. They can also be used with an entire accessory line.

Geekvape also has the Aegis Boost Plus. The Boost Pro looks very similar, and it has the same leather heel as the Boost Pro. The battery compartment is identical, but it has a USB Type C port rather than the standard 510 port.

The Aegis Boost Pro pod mod is a single 18650-powered device, but the Aegis Boost Plus includes an RDTA pod. Both pods can hold 6ml of e-juice and are interchangeable.

Even with the 18650 battery, the Aegis Pod System weighs in at a mere 2.2 lbs. It features a rubber-round front and a wheel-shaped control for airflow. It can also be used with rebuildable atomisers and tanks thanks to its 510 adapters.

Aegis Boost Pro is also IP67-rated. This makes it water- and dust-resistant. The device has a USB Type C charging port and a maximum power output of 100W. To get the maximum output, however, you will need to use the mod pod using larger and more powerful coils.

Aegis Boost Pro has a user-friendly interface. The screen is colour-coded and the dial adjusts airflow to three different levels. You can use the mod pod with resistances from 0.1 to 3 Ohms.

The Aegis Boost Pro mod pod is IP67-rated and uses a single 18650 battery to power it. It can generate a maximum power output of 100W and can supply power to the evaporator in less than a tenth of a second.


The Geekvape Aegis Pro 100W Pod Mod Kit, among all the exciting new pod mods available, is the best option for vapers who want a small pod system with great flavour and power. Geekvape Aegis Boost100W Pod Mod Kit features an upgraded chipset and a new P-Series coil head. It also has improved airflow and a USB Type-C port.

Geekvape Aegis Pod Mod runs on a single 18650 lithium battery. The mod pod can adjust its power output from 5 to 100 watts. The mod pod can hold 6ml of e-liquid. The mod pod also has a USB Type C port and an updated colour display.

Both the Geekvape Aegis Plus Plus and Aegis Boost Plus use refillable pods. The Aegis Boost Plus pod has top airflow and a leak-free design. This pod is perfect for cloud chasers as well as direct lung vapers.

Geekvape Aegis Pro 100W Pod Mod Kit has an updated Gen 2 three-inlet airflow control. This allows for thicker and larger clouds. A temperature control suite is also available on the mod pod. This allows users to adjust the temperature to achieve desired levels of vaporization. Geekvape Aegis Pro has an IP67 rating, which means that it is water- and dust-resistant. The adapter can be used to connect to a 510 device, which allows for rebuildable atomizers.

Geekvape’s Aegis Boost Pro is made from durable zinc alloy with a leather-covered body. It is shock- and dust-resistant. You will find the battery compartment at the bottom. The battery compartment is located at the bottom. It also has an external screw port and a folding key for easy access.


Geekvape’s newest addition to their Aegis pod mod line is the Boost Pro 100W Pod Mod Kit. The mod has a 100W maximum output, a 0.96-inch colour display, an improved temperature control suite and a zinc-alloy chassis. It is waterproof to IP67 and compatible with an external 18650 battery.

Geekvape’s new Boost Pro100W Pod Mod Kit uses a second-generation AFC upgrade, which produces thicker, bigger clouds. Two air inlets are located under the control ring to allow for more air to flow into the mod.

Aegis Boost Pro has a 6mL e-liquid capacity, a USB Type-C charging port and a bottom-threaded battery cap. It has an IP67 rating, which means it is water- and dust-proof. The AS chipset in this pod mod means that it can produce a lot of power. The new interface features new themes, updated UI settings and a colour screen.

Geekvape’s Aegis Boost Pro comes with a refillable pod. It has a snap-in connection. The pod is 8mm wide and fits snugly on the top of your device.

The Aegis Boost Pro Pod Mod Kit can be used with a wide range of atomizers, tanks and rebuildables. The temperature control suite allows it to produce smooth, large vapour clouds.

GeekVape’s P Series coils are compatible with Aegis Boost Pro. They are optimized for higher wattage. These coils produce thicker, more flavorful vapes. These coils can be purchased here. Geekvape’s B-series coils are not included in this pod mod kit. The coils must not be left unattended and should be placed on a non-flammable surface.

Geekvape’s Aegis Boost Pro 100W Pod Mod Kit offers a great option for anyone looking for a pod that produces huge clouds and provides great flavour. It has a temperature control suite and a zinc-alloy chassis. The battery can hold 3500mAh. It can also be waterproofed to IP67 and can withstand shock.


Geekvape Aegis Boost Pro100W Pod Mod kit: The Aegis Boost Pro100W pod mod is the ultimate vaping device. Geekvape’s most recent chipsets are used to build this pod system. It provides multiple layers of protection. The pod system also has a three-inlet airflow control system that allows for easier control of the inhale.

It’s also shock- and water-resistant. The mod features a new colour display as well as a USB Type C port. It can also be used with 18650 batteries. It can hold six mL of liquid in its pod.

The Aegis Boost Pro mod is powerful and delivers rich flavour. It is made from the best materials available in the vaping industry. It has a family-styled design. It is made of zinc alloy with leather panelling. It is dust-resistant and IP67-rated.

The display has a TFT colour display of 0.96 inches and five themes. The mod also features a USB Type C port and an adjustable airflow dial. It also has classic power modes as well as a refillable pod. It can be filled up to 100% with the snap-in connector.

Geekvape Aegis Boost Pro Pod Mod features a 5-100W output range and a temperature control suite. For power and convenience, it also has a single 18650 battery.

Geekvape Aegis Boost Pro Pod Mod features a refillable pod and a snap-in connector. This mod is made of durable zinc alloy and produces 5-100W. It has a USB Type C port and an advanced 3-inlet airflow control system. It features a temperature control suite and can store up to 6 mL of liquid in its pod.

Most Frequently Asked Questions

A Geekvape Aegis Boost Pro Pod Mod Kit is a great choice for anyone looking to enjoy a powerful yet portable vape. It is dust-proofed and waterproofed to IP67, making it resistant to harsh environments. The device also has a brand-new user interface with five themes. The atomizer coils can be used to provide a wide range of vaping experiences.

A single 18650 battery is included in the device, which gives you hours of battery life. To make sure the device feels secure, the battery cap has an O-ring. It also has a USB-C fast charging port that makes it easy to charge. The device also features a 0.96-inch colour display. It can hold six mL of liquid.

Two atomizer coils are included with the device. One is rated at 0.6% ohm. The other is rated at 0.4 ohms. Although the device is waterproof and dustproof, it can be susceptible to scratches.

You can order online Aegis Boost Pro in blue colour in the UK or any country you want! The two-inlet airflow control system allows for big vapour clouds. You can also enjoy up to 100W of power with the replaceable 18650 battery. It also has a USB Type-C port.

Another great choice for pod vaping is the Geekvape Aegis Boost Plus. This device is ideal for intermediate and beginner users. There are two options for atomizer coils. They come in different resistances including 0.4 and 0.6 ohms. You can also activate the atomizer coils with a draw-activated firing mechanism.

Although it is slightly larger than the original AegisBoost, it still holds 5.5mL e-liquid. The screen is smaller, but the AFC Gen 2 airflow system allows for larger clouds. You can also use it with rebuildable tanks and atomisers by using the 510 adapters.